Imitation wooden bridge guardrail 06

With the continuous improvement of economic level, many green belts have seen the emergence of flower plants supported by flower racks, which have beautiful and elegant shapes and high ornamental value. Currently, many flower racks are made of wood as raw materials, which is costly and short-lived. In addition, flower racks are generally set up in the later stage. The ground has already been hardened in the early stage, and the later placement of flower racks requires drilling holes to load piles, which will increase the workload. Moreover, because the hardened area is not easy to excavate too much, otherwise the joints in the early and late stages are prone to cracking, and the depth of the load piles is relatively shallow. Therefore, when encountering strong wind weather, it is easy to cause tipping. The cement imitation wood flower rack is made of reinforced concrete, which has the advantages of high plasticity, high strength, long service life, strong artistic simulation, green environmental protection, non corrosion, non flammability, and non deformation.
Imitation wooden flower racks are often seen in real life, communities, and parks, and are a very harmonious urban decoration. Next, I will share with you the installation process of the imitation wood flower stand.
1. On site investigation: This is a prerequisite for the post production and installation of flower racks, and it is an important step because the installation work of the latter should be based on previous survey data. When surveying a site, attention should be paid to whether the soil and terrain conditions on the ground are unequal. Then, based on these conditions, draw the shape of the flower stand and select the type of flower stand.
2. Drawing design: Based on the preliminary investigation of the site and the customer's requirements, observe the architectural style of the surrounding buildings, determine the painting design and rendering of the imitation wood flower stand, including the size, effect, and structural connection of the flower stand. In this step, we should try our best to fully understand the customer's needs, communicate with them, use existing molds as much as possible, and save costs< br />


3. Product production: After selecting the appropriate style, it will be sent to the production department. According to the drawing requirements, the production department uses the application materials of the design proportion and the structural connection requirements of the imitation wood flower rack in the design drawings to produce products. In the production process, it is necessary to fully ensure the integrity and tightness of the production process, and fully guarantee the quality issues of the products.
  4. Transportation and installation: After the flower rack is completed, basic maintenance should be carried out. After the flower stand reaches a certain strength, it should be shipped to the installation site. Then users can install the construction site according to the specifications of the design drawings.
5. Key points of flower stand design

(1) As a decoration, flower stands should be coordinated with the surrounding environment as much as possible< br />
(2) The flower stand should not be made too large. Imitation wood flower racks are exquisite and meticulously coordinated products, and they are too large to be easily transported< br />
(3) The periphery of the flower stand is generally smooth. The upper and lower planes of the flower stand do not necessarily need to be symmetrical or similar. They can naturally bend, intersect, and extend with each other, allowing the imitation wooden flower rack to be placed in the flower garden and blend into nature< br />
(5) After installing the wooden flower stand, the shape of the wooden flower stand should be designed according to the surrounding environment and plant characteristics, and the flower stand should be designed according to the biological characteristics of climbing plants.